 |
|
|
|
|
Aperçu du produit
Étiquette

Caractéristiques
Étiquette
|
| | |
Garantie du fabricant |
| Garantie de 1 an(s) |
Poids |
| 3,95 lb |
Dimensions (LxPxH) |
| 8,5 po par 9,1 po par 1,6 po |
Alimentation |
| CA 120/230 V (50/60 Hz) |
Capacité |
| Maximum number of access points: 250¦Maximum number of clients: 5000¦Wireless LANs: 4096¦VLANs supported: 4096 |
Performance |
| Throughput: 5 Gbps |
Protocole de liaison de données |
| Gigabit Ethernet, 10 Gigabit Ethernet, IEEE 802,11ac Wave 2, IEEE 802,11ac Wave 1 |
Facteur de forme |
| Rack-mountable-1U |
Type de dispositif |
| Network management device |
Description du produit |
| Cisco Catalyst 9800-L Wireless Controller-network management device-Wi-Fi 6 |
|
|
| | |
|
| |
Type de dispositif |
| Network management device |
Height (Rack Units) |
| 1U |
Largeur |
| 8,5 po |
Profondeur |
| 9,1 po |
Hauteur |
| 1,6 po |
Poids |
| 3,95 lb |
|
| |
Facteur de forme |
| Rack-mountable |
Technologie de branchement |
| Sans fil, avec fil |
Protocole de liaison de données |
| Gigabit Ethernet, 10 Gigabit Ethernet, IEEE 802,11ac Wave 2, IEEE 802,11ac Wave 1 |
Protocole de réseau/transport |
| TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP, Bonjour |
Protocole de gestion à distance |
| SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH |
Performance |
| Throughput: 5 Gbps |
Capacité |
| Maximum number of access points: 250¦Maximum number of clients: 5000¦Wireless LANs: 4096¦VLANs supported: 4096 |
Indicateurs d'état |
| Power, system, link/activity |
Caractéristiques |
| VLAN support, Syslog support, IPv6 support, SNTP support, Wi-Fi Multimedia (WMM) support, RADIUS support, CAPWAP support, Internet Control Message Protocol (ICMP), User Datagram Protocol (UDP), Datagram Transport Layer Security (DTLS) |
Algorithme de cryptage |
| Triple DES, AES, IKE, SSL, TLS, WPA, WPA2, PKI, ESP, CRL, CCM, CCMP |
Méthode d'authentification |
| RADIUS, Extensible Authentication Protocol (EAP) |
Conformité aux normes |
| IEEE 802.3, IEEE 802,3u, IEEE 802,1Q, IEEE 802,11b, IEEE 802,11a, IEEE 802,11d, IEEE 802,11g, IEEE 802,11h, IEEE 802,11e, IEEE 802,11n, IEEE 802,11k, IEEE 802,1AX, IEEE 802,11w, IEEE 802,11r, IEEE 802,11u, IEEE 802,11ac Wave 2, IEEE 802,11ac Wave 1, IEEE 802,11ax |
|
| |
Interfaces |
| 1 x console-RJ-45¦1 x management-RJ-45¦1 par USB-Type A¦1 x mini-USB-Type B¦1 x redundancy¦4 x 10Gb Ethernet-RJ-45¦4 x 1/2,5GBase-T-RJ-45 |
|
| |
Conformité aux normes |
| VCCI, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, CISPR 22, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, FCC CFR47 Part 15, AS/NZS CISPR 22, CNS 13438, EN 300 386, KN32, UL/CSA60950-1, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, IEC/EN 61000-4-11, IEC/EN 61000-4-2, EN 55032, IEC/EN 60950-1, CAN/CSA-C22,2 No. 60950-1, IEEE 802.3, IEEE 802,1x |
|
| |
Dispositif d'alimentation |
| Adaptateur secteur externe |
Voltage nécessaire |
| CA 120/230 V (50/60 Hz) |
Consommation d'énergie en fonctionnement |
| 86,9 Watt |
Courant fourni |
| 110 watts |
|
| |
Configuration fournie |
| Cisco IOS XE |
|
| |
Service et soutien |
| Garantie limitée-1 ans |
|
| |
Température min. de fonctionnement |
| 32 °F |
Température max. de fonctionnement |
| 104 °F |
Degré d'humidité en fonctionnement |
| 10-95 % (sans condensation) |
|
Rechercher des produits similaires
Étiquette
|
|