|
|
|
|
|
Aperçu du produit
Étiquette
Caractéristiques
Étiquette
|
| | |
Garantie du fabricant |
| Garantie à vie limitée |
Poids |
| 21,96 lb |
Dimensions (LxPxH) |
| 17,5 po par 18 po par 1,7 po |
Power Redundancy |
| Facultatif |
Alimentation |
| AC 120/230 V (50-60 Hz) |
Conformité aux normes |
| IEEE 802.3, IEEE 802,3u, IEEE 802,1D, IEEE 802,1Q, IEEE 802,3ab, IEEE 802,1p, IEEE 802,3x, IEEE 802,3ad (LACP), IEEE 802,1w, IEEE 802,1x, IEEE 802,3ae, IEEE 802,1s, IEEE 802,1ae, IEEE 802,3ba |
Caractéristiques |
| DHCP support, NAT support, PAT support, trunking, MPLS support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), Non-Stop Routing (NSR), Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Maximum Likelihood Demodulation (MLD), Flexible NetFlow (FNF), Multicast Source Discovery Protocol (MSDP), MACsec support, Control plane protection (CoPP), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, Layer 3 VPN (L3VPN) support, CoAP support, Switched Port Analyzer (SPAN) |
Protocole de gestion à distance |
| SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, NETCONF, RESTCONF |
Protocole de routage |
| OSPF, IS-IS, RIP-2, BGP, EIGRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, RIPng, MPLS |
Jumbo Frame Support |
| 9198 bytes |
MAC Address Table Size |
| 64K entries |
Capacité |
| Routing table entries: 80000¦Indirect IPv4 routes: 212000¦Host IPv4 routes: 90000¦Indirect IPv6 routes: 212000¦Host IPv6 routes: 90000¦Multicast scale: 32000¦QoS ACL scale: 16000¦Security ACL scale: 270000¦FNF entries: 96000¦VLAN IDs: 4000¦Switched virtual interfaces (SVIs): 4000 |
Performance |
| Switching capacity (full duplex): 3,2 Tbps¦Forwarding rate: 1 Bpps |
Ports |
| 48 x 25 Gigabit SFP28 |
Sous-type |
| 25 Gigabit Ethernet |
Type de boîtier |
| Rack-mountable 1U |
Type de dispositif |
| Commutateur-48 ports-L3-managed |
Description du produit |
| Cisco Catalyst 9500-Network Advantage-commutateur-48 ports-managed-rack-mountable |
|
|
| | |
|
| |
Type de dispositif |
| Commutateur-48 ports-L3-managed |
Type de boîtier |
| Rack-mountable 1U |
Sous-type |
| 25 Gigabit Ethernet |
Ports |
| 48 x 25 Gigabit SFP28 |
Performance |
| Switching capacity (full duplex): 3,2 Tbps¦Forwarding rate: 1 Bpps |
Capacité |
| Routing table entries: 80000¦Indirect IPv4 routes: 212000¦Host IPv4 routes: 90000¦Indirect IPv6 routes: 212000¦Host IPv6 routes: 90000¦Multicast scale: 32000¦QoS ACL scale: 16000¦Security ACL scale: 270000¦FNF entries: 96000¦VLAN IDs: 4000¦Switched virtual interfaces (SVIs): 4000 |
MAC Address Table Size |
| 64K entries |
Jumbo Frame Support |
| 9198 bytes |
Protocole de routage |
| OSPF, IS-IS, RIP-2, BGP, EIGRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, RIPng, MPLS |
Protocole de gestion à distance |
| SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, NETCONF, RESTCONF |
Algorithme de cryptage |
| AES 256 bits |
Caractéristiques |
| DHCP support, NAT support, PAT support, trunking, MPLS support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), Non-Stop Routing (NSR), Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Maximum Likelihood Demodulation (MLD), Flexible NetFlow (FNF), Multicast Source Discovery Protocol (MSDP), MACsec support, Control plane protection (CoPP), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, Layer 3 VPN (L3VPN) support, CoAP support, Switched Port Analyzer (SPAN) |
Conformité aux normes |
| IEEE 802.3, IEEE 802,3u, IEEE 802,1D, IEEE 802,1Q, IEEE 802,3ab, IEEE 802,1p, IEEE 802,3x, IEEE 802,3ad (LACP), IEEE 802,1w, IEEE 802,1x, IEEE 802,3ae, IEEE 802,1s, IEEE 802,1ae, IEEE 802,3ba |
Processeur |
| 1: 2,4 GHz |
RAM |
| 16 Go |
Mémoire flash |
| 16 Go |
Dispositifs intégrés |
| RFID tag |
|
| |
Interfaces |
| 48 x 25Gbit LAN SFP28¦4 x 100Gbit LAN¦2 x USB 3 |
|
| |
Dispositif d'alimentation |
| Internal power supply-hot-plug |
Qté installée |
| 1 |
Qté max. supportée |
| 2 |
Power Redundancy |
| Facultatif |
Power Redundancy Scheme |
| 1+1 |
Courant fourni |
| 650 watts |
Voltage nécessaire |
| AC 120/230 V (50-60 Hz) |
|
| |
Durée moyenne sans panne |
| 316 960 heures |
Conformité aux normes |
| CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, TVCN 7317, VCCI V-3/2009 Class A, CAN/CSA-C22,2 No. 60950-1 |
|
| |
Logiciel inclus |
| Cisco IOS XE 16.8.1 |
|
| |
Largeur |
| 17,5 po |
Profondeur |
| 18 po |
Hauteur |
| 1,7 po |
Poids |
| 21,96 lb |
|
| |
Service et soutien |
| Garantie limitée-Remplacement-à vie-Temps de réponse : prochain jour ouvrable¦Soutien technique-consulting-90 jours |
|
| |
Température min. de fonctionnement |
| 32 °F |
Température max. de fonctionnement |
| 104 °F |
Degré d'humidité en fonctionnement |
| 5-90 % (sans condensation) |
Température de stockage minimale |
| -4 °F |
Température de stockage maximale |
| 149 °F |
Humidity Range Storage |
| 5-95 % (sans condensation) |
|
Rechercher des produits similaires
Étiquette
|
|